Polyclad Plantation Shutters

Polyclad Wood Shutters are the best poly shutters available today. Each shutter is custom hand built with a strong solid hardwood core that is then clad with a poly surface. The shutters look and feel like traditional wood shutters but eliminate the maintenance challenges or- environmental hazards of painted wood.


• Lifetime Limited Warranty.
• Custom-made in about 10 business days.
• Easy to install with ordinary household tools.
• Most shutters come fully assembled.
• Low maintenance. Never requires painting.
• Resists moisture. Clean with just soap and water.
• Will not fade, crack, peel, or warp.
• Shutter orders incur a $ 95 per order packing fee.

Measuring for custom shutters:

Do you want the shutter to mount recessed within your window opening, known as an "Inside Mount", OR outside the window opening on the trim (if any) or directly on the wall, known as an "Outside Mount". Keep in mind that if you have less than 2" of depth it must be an Outside Mount because the louvers would not rotate open if the depth is too shallow. French Doors are always done as an Outside Mount.

For an Inside Mount you will need to measure the width and height in three places, down to the eighth of an inch and make sure you use the SMALLEST measured width and height for each.

For an Outside Mount you will need approximately 2" of flat space all the way around the window for the frame to attach to the wall or trim. To determine the size needed, measure the exact overall width and height of the framed size needed. This size will be the overall size from outside edge of frame to outside edge of frame.


Comfortex Woodwinds Plantation Shutters Lifetime Limited Warranty

Comfortex warrants that its window treatments will be free from defects in materials and workmanship for as long as the original residential purchaser owns the product, provided that the product was installed properly and in accordance with the installation instructions. The limited lifetime warranty is extended to the original residential purchaser only, in the original window for which it was installed.

The warranty does not include any conditions or damages resulting from accidents, alterations, misuse, extraordinary use, misapplication, improper handling, improper installation, improper repairs, operation or cleaning, loss of color intensity, exposure to salt air, damage from insects, or the yellowing and cracking of plastic parts with the passing of time. This warranty does not cover variation in color, grain, or texture in natural wood products nor excessive warping of wood slats in high humidity areas. Loss of pleating is not covered if the product is not being cycled (held in the raised position a portion of the time). Normal wear and tear is not covered.

All moving parts, such as cords, will eventually wear out and fabric may fray. Comfortex considers these things as normal wear and tear and will carry a three year limited warranty.

This limited warranty does not cover transportation costs to and from the retailer, costs of removal, re-measure, or reinstallation of product, or any incidental or consequential damages.

If a Comfortex product is found to be defective in materials or workmanship, we will, at our discretion, repair, replace or refund the cost of a product which fails to conform to this limited warranty. Colors vary from lot to lot and may not exactly match sample swatch, sample book, or previous purchases. Discontinued components or color selections will be replaced with the closest equivalent current product. This shall be your sole remedy under this limited warranty.

To obtain service, contact the dealer from whom you purchased the product.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER OBLIGATIONS, LIABILITIES OR WARRANTIES. In no event shall Comfortex or its licensed fabricators or distributors be liable for INCIDENTAL OR CONSEQUENTIAL DAMAGES, or for any other damage, loss or expense, cost or fee associated with such damage. In some states, exclusions for incidental or consequential damages are not allowable.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Policy is subject to change without notice.

This limited warranty is exclusive of commercial use. Contact Comfortex Technical Service for more information. No agent, representative, dealer or unauthorized employee has the authority to increase or alter the obligation of this warranty.

This limited warranty supersedes any previous versions.

Frame Type: Standard L Frame, Standard Z Frame and Deluxe Z Frame. (See Spec tab for more info)
Louver Size: Available in 2 1/2" or 3 1/2" Louver Sizes.
Mount: Available as Inside or Outside Mount
Divider Rail: Available from 20" to 60" from the bottom of the shutter. (Required on heights over 60")
Shutter Configurations: Available in 20 different configurations

Frame Type:      
L-Frame (Inside or Outside Mount)
request sample
Trim Frame (Inside Mount Only)
request sample
Designer Frame (Outside Mount Only)
request sample

Product Specifications

Minimum Ordered Width 12"
Minimum Ordered Height 20"
Maximum Ordered Width
(As a set of Multiple Panels hinged together w/o a Bi-Fold track)
Maximum Ordered Height (w/o a Divider Rail) 60"
Maximum Ordered Height (with a Divider Rail) 112"
Installation Requirements

Min Flushed Mount Depth (Standard Z Frame)
2 1/2" Louver
3 1/2" Louver

1 1/2"
Min Flushed Mount Depth (Deluxe Z Frame)
2 1/2" Louver
3 1/2" Louver

1 1/2"
Min Flushed Mount Depth (Standard L Frame)
2 1/2" Louver
3 1/2" Louver

2 3/8"
2 3/8"
Minimum inside mount depth (fully recessed) 2 1/4"
Minimum outside mounting surface 2 1/4"

Frame Style

Click to View Frames Spec Page

Frame Configurations

Shutter Frame Configurations
Click here to view our detailed Measuring Instructions. Note: This link opens in a new window.
View or print our Woodwinds Plantation Sutters installation instructions:

Installation Instructions